Sony SA-VA100 Operating Instructions Manual page 17

Automatic Source Selection
If you press CD · on the
remote while you are
listening to other sound
source, the CD player is
selected and play starts from
the CD whose disc indicator
is green.
Note
If there is no CD in the
player, "CD NO DISC"
appears in the display. Press
DISC 1~7 (or CD · on the
remote) while the indication
is on, and the disc tray will
open automatically.
5
Press DISC 1 ~ 7 to choose the disc you want to play.
The disc tray closes automatically and play starts. If you press ·
(or CD · on the remote), play starts from the beginning of
the selected CD (the CD whose disc indicator is green).
6
Press MASTER VOLUME + or – (or VOL + or – on the remote)
to adjust the volume.
To
Stop play
Pause
Resume play after pause
Go forward to another track
Go backward to another track
Locate a specific part in a track
Search quickly by observing
the display during pause
Select a particular disc
Remove the current disc
* If no disc is loaded at that number, the tray will emerge.
To select the CDs to be played
To play
Only the current CD
All the CDs in all the trays
What the indicators on DISC 1 ~ 7 indicate
The indicators on DISC 1 ~ 7 change colors to indicate the status of the
respective disc tray.
• A green indicator shows that the tray is selected (either during
playback or standby, or when the tray is open) no matter if there is a
CD inside or not.
• An orange indicator shows that there is a CD in the disc tray but the
tray is not currently selected.
• No indicator shows that the tray is empty.
Basic Operations
Press (on remote)
STOP p (p)
PAUSE P (P)
( (CD · ) or PAUSE P (P)
( + )
)
0 ( = )
Press and hold down ) or 0
Press and hold down ) or 0 until
you find the desired point. You will not
hear the sound during this operation.
DISC 1~7* (press DISC SKIP repeatedly)
§ OPEN/CLOSE
Press 1/ALL DISCS so that
"1 DISC" appears
"ALL DISCS" appears
17