Recording From Other Components - Sony SA-VA100 Operating Instructions Manual

Operating the Tape Deck Using OSD
5
Press DOLBY NR repeatedly to select DOLBY NR
B or C when you want to reduce tape hiss in low-
level, high- frequency signals.
6
Press REC.
The r (REC) and P (pause) indicators light up
and the deck stands by for recording.
The direction indicators (9 or () light to
indicate which sides of the cassette you can use to
record.
(For a full explanation of the 9 and (
indicators, see "What the 9 and ( indicators
indicate" on page 50.)
If you want to record on the reverse side only
Press 9 so the 9 indicator lights steadily.
7
Press P, to release the record pause and start
recording.
To stop recording
Press STOP p.
To insert a blank space
See "Inserting a blank space during recording using the
controls on the speaker" on page 57.
Note
Adjusting the volume will not effect the recording level.
But this will change the sound levels you hear through the
speakers or headphones.
54
Recording From Other
Components
You can record the audio signals from components
connected to the VIDEO 1 and VIDEO 2 IN jacks onto a
tape. Use TYPE I (normal) or TYPE II (CrO2) tapes for
recording.
1
Press EJECT § on the right speaker and insert a
blank tape into the tape deck, with the side you
want to record facing forward.
Make sure the tabs on the cassette have not been
removed.
2
Click FUNCTION in the main menu.
3
Click VIDEO 1 or VIDEO 2 to select the
component you want to record.
FUNCTION
VISUAL
4
Prepare the source to play the program you
desire. See the operating instructions supplied
with the respective equipment for details.
5
Click REC EDIT.
FUNCTION
S
O
U
N
D
SOUND
VIDEO 1
EXIT
SYS
OFF
VOL
+
–
REC EDIT