Powering The Camera On/Off; Camera Functions; Setting The Date/Time (Mp4 -Turned Off) - Satir UMTI User Manual

UMTI User Manual UMTI

3.3 Powering the Camera ON/OFF

The power indicator can be seen by looking inside the Viewfinder, it represented by a green LED.
While this is lit the camera is powered on.
To power the camera ON press and hold the power button for 3 seconds. The power indicator in the
viewfinder will turn green and the start-up image, see below, will appear on the screen.
To power the camera OFF, hold the power switch for 3 seconds until the power indicator is no longer
green.

3.4 Camera Functions

3.4.1 Setting the date/time
(MP4 –turned off)
You need to set the Date/Time when you turn on the IR camera on for the first time.
Press and keys simultaneously to enter or exit TIME SETTING mode
Press the key to switch the date and time location. Press the key to increase the selected
numerical value; and press the key to decrease the selected numerical value.
Page 8