Advertisement
S
4: L
I
H500 A
TEP
OG
NTO THE
CCESS
As specified in
Step 3: Prepare Your Computer for H500
the H500 should be directly connected to your computer (through
the PoE In Ethernet port on the back of the H500) and powered
on, ready for setup.
1
On your computer, open a Web browser window.
2
In the browser, type this URL to connect to the H500:
https://192.168.0.1
3
Press <Enter> to initiate the connection. When a security alert
dialog box appears, click OK/Yes to proceed.
4
When the Ruckus Wireless Admin login page appears, enter
the following:
•
Username: super
•
Password: sp-admin
5
Click Login.
Copyright © 2014 Ruckus Wireless, Inc.
Draft Published 11 December 2014, Part Number 800-70718-001 Rev A
P
S
5: C
OINT
TEP
USTOMIZE THE
Setup,
Default H500 Access Point Settings (for your reference)
Network Names (SSIDs)
Security (Encryption method) Disabled for each wireless
Default Management IP
Address
1
On the Web interface menu, click Configuration > Radio
2.4G or Configuration > Radio 5G. The Configure >
Wireless > Common page appears.
2
Verify that the following options are active:
•
Channel: SmartSelect.
•
Country Code: If you are not located in the United States
of America, select your current country.
3
Click Update Settings if you made any changes.
4
Click any of the "Wireless #" (Wireless LAN Number) tabs at
the top of the page.
5
In Wireless Availability, click Enabled.
6
Delete the text in the SSID field, then type a name for your net-
work that will help your users identify the H500 access point in
their wireless network connection applications.
7
Click Update Settings to save your changes.
8
Repeat Steps 4-7 for each Wireless # (Wireless LAN Number)
interface that you want to enable.
9
Click Logout to exit the Web interface.
Optional: In a default H500 configuration, the H500 uses a
DHCP-assigned IP address.
If you anticipate logging into the H500 regularly to perform
monitoring or maintenance once it is in place, then you may want
to consider switching from DHCP and instead assigning a static
IP address to the H500.
A. On the menu, click Configuration > Internet.
B. Click the Static IP option.
C. Fill in the IP Address and Mask fields.
D. Click Update Settings to save your changes.
10
When the Ruckus Wireless Admin login page reappears, you
can exit your browser.
11
Disconnect the computer from the H500 and from the power
source, and then restore your computer to its original network
connection configuration.
Continue with
Step 6: Mounting Bracket on an Outlet
W
S
IRELESS
ETTINGS
Wireless1-Wireless8 (2.4GHz
radio)
Wireless9-Wireless16 (5GHz
radio)
interface
192.168.0.1
Box.
S
6:
Mounting Bracket on an Outlet Box
TEP
Figure 3: Mounting bracket
1
Use either the original wall outlet box screws or the factory-
supplied 1" Phillips pan head machine screws to attach the
H500 mounting bracket to a single-gang wall outlet box.
Note: The H500 mounting bracket has four hooks that face UP.
Make sure that the hooks are facing up when attaching the
mounting bracket to the wall outlet box.
2
Pull the uplink Ethernet cable for the H500 from the LAN
through the wall outlet box.
3
When you are powering the H500 with a customer-ordered
DC power adapter, pull the power cable from the adapter
through the wall outlet box.
4
When you have extra Ethernet cables (usually one or two) that
are to bypass the H500, pull them through the wall outlet box.
Drape the bypass Ethernet cables across one or both of the
upper hooks on the mounting bracket.
Continue with
Step 7: Attaching the H500 to the Mounting
Bracket.
Page 3 of 4
Advertisement
