Maintenance And Care; Faults - ergoline Lounge Turbo Power Operating Instructions Manual

Please read and observe ...

Maintenance and care

Extreme danger!
The device must be deenergised when performing
maintenance work requiring the opening of the device.
See Page 36.
Maintenance and care play a major role in deciding whether the device
meets the requirements placed on it in a satisfactory manner. The
compliance with the specified maintenance intervals and the careful
conducting of the maintenance and care work are therefore absolutely
necessary – see Page 58 ff.
The current operating hours of the parts requiring maintenance can be
displayed in the Presetting mode – see Page 77 ff.
Remount any protective devices (e.g. filter panels) after completing work.
We point out that the device must be subject to repetitive inspections
by our customer service or an approved specialised company every
12 months (from commissioning) to maintain its proper condition!
Caution!
Only use genuine spare parts of the same type!
The use of other parts voids the CE conformity!
Any liability is excluded in case of damage or injury proven
to be the result of the use of non-genuine spare parts.

Faults

1)
In the case of a fault, error codes
localising of the fault cause (see separate manual):
• If a fault occurs, the fault code flashes in the display.
• If several faults occur, the fault messages are displayed alternately.
• The fault remedy is acknowledged by pressing the
• If the fault cannot be eliminated, inform Customer Service.
1) Error codes, Order No. 800751
appear on the display to simplify
button.
35