Product Information - ergoline Lounge Turbo Power Operating Instructions Manual

Please read and observe ...
Plastic surfaces
For cleaning the other plastic surfaces, it is best to use warm water and
a leather cloth. Never use aggressive cleaning agents containing alcohol,
e.g. the commercially available Sagrotan, or essential oils. These may
lead, in the long run, to damages not covered by the guarantee.
During cleaning a slight discolouration of the leather cloth by the rubber
seals must be expected for production-related reasons.
Note:
Prevent damage to the acrylic glass and plastic surfaces.
Remove rings, watches, bracelets etc. before the start of
cleaning work.
38

Product information

Acrylic glass panels
The acrylic glass panels for the tanning devices are produced of acrylic
glass developed especially for this application. The acrylics used are
characterised by a particularly high UV permeability and resistance, as
well as an easy-care, hygienic surface.
The acrylic glass panels are formed to their shapes for the specific
devices in a technically complex production process. Despite state-of-
the-art production know-how, the presence of minor spots, air bubbles or
streaks in the acrylic panels is unavoidable. In addition, hairline cracks
can occur during operation.
These occurrences are material-dependent and are unavoidable in
processing, however have no significant effect on the utility value and
can therefore not be recognised as defects.
02756 / 0