Casio QT-7300 Service Manual page 26

4-14-2-5. PCI / Plug and Play Setup
PNP OS Installed
Resources Controlled By
Reset Configuration Data
PNP OS Installed < No >
•
Select Yes the system operating environment is Plug-and-Play aware (e.g., Win98/98SE/2000).
Resources Controlled By < Auto >
•
The Award Plug and Play BIOS can automatically configure all the boot and Plug and Play-compatible
devices. If you select Auto, all the interrupt request (IRQ), DMA assignment, and used DMA field
disappear, as the BIOS automatically assigns them.
• Reset Configuration Data < Disabled >
Normally, you leave this field Disabled. Select Enabled to reset Extended System Configuration Data
(ESCD) when you exit Setup if you have installed a new add-on and system reconfiguration has caused
such a serious conflict that the operating cannot boot.
IRQ 3 Assigned to < Legacy ISA >
•
• IRQ 4 Assigned to < Legacy ISA >
• IRQ 5 Assigned to < PCI/ISA PnP >
• IRQ 7 Assigned to < Legacy ISA >
IRQ 9 Assigned to < PCI/ISA PnP >
•
• IRQ 10 Assigned to < Legacy ISA >
• IRQ 11 Assigned to < Legacy ISA >
• IRQ 12 Assigned to < PCI/ISA PnP >
• IRQ 14 Assigned to < PCI/ISA PnP >
ROM PCI/ISA BIOS (2A69KA5C)
PNP/PCI CONFIGRATION
AWARD SOFTWARE, INC.
: No
: Auto
: Disabled Assign IRQ For USB
Onboard Ethernet BootROM
ESC : Quit
F1 : Help
F5 : Old Values
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
— 24 —
< Screen shows all default setting >
: Enabled
: Disabled
↑ ↓ → ←
: Select Item
PU/PD/+/- : Modify
(Shift) F2 : Color