Memory Menu; New Batch - DeFelsko PosiTector 6000 Instruction Manual

Memory Menu

Memory Menu
The PosiTector App uses your smart device's storage for recording
measurement data. Stored measurements can be reviewed
on-screen or shared via email (PDF, CSV). Measurements are date
and time-stamped (using date/time from smart device).
The following options appear within the menu.
Additional options may appear depending on the connected
Memory
PosiTector SmartLink and probe type.

New Batch

Closes any currently opened batch and creates a new batch name
using the lowest available number. For example, if only Batch 1 and
Batch 3 exist, then Batch 2 would be created and made the current
batch.
The X icon appears and basic statistics are displayed.
Each measurement will be displayed and stored into this new batch.
On screen statistics are immediately updated with each measurement.
New batch names are date-stamped at the time they are created.
Shortcut:
When a batch is open, press the LED button on the
PosiTector SmartLink or X icon on the display to create a new batch.
The following 3 screen views are available when a batch is open
(Memory ON). Swipe your finger horizontally across the screen to
switch between views.
13