Menu Operation - DeFelsko PosiTector 6000 Instruction Manual

Factory Cal settings can be restored at any time by creating a
New Cal setting (pg 27), by Resetting the Current Cal (pg 28) or by
performing a Reset (pg 30). The
display whenever factory Cal settings are in use.
With "FN" probes, calibration adjustments (pg 23) are made only to
either the "F" or "N" mode (stored independently under a particular
Cal), whichever was measured last.
PosiTector 6000 functions are menu controlled. Access them by
selecting Menu in the upper right of the PosiTector App display.
The Main Menu contains the following sub-menus...
Memory (pg 13)
•
Statistics (pg 21)
•
Cal Settings (pg 23)
•
Setup (pg 29)
•
Select Exit to close the menu.

Menu Operation

Menu Operation
12
X symbol appears on the