Replacing An Expansion Board - HP ProLiant ML30 Gen9 Maintenance And Service Manual

9. Remove the Smart Storage Battery holders.
To replace the component, reverse the removal procedure.

Replacing an expansion board

WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and internal system components
to cool before touching them.
Procedure
1. Power down the server.
2. Disconnect the power cord from the power source and the server.
3. Remove the bezel.
4. Place the server on its side with the access panel facing up.
5. Remove the access panel.
6. Remove the air baffle.
Replacing an expansion board 49