IKEA VALFRI Manual page 15

ENGLISH
Baking tray / Deep pan
Push the Baking tray / Deep pan between
the guide bars of the shelf support.
Wire shelf and baking tray / deep pan
together:
Push the baking tray / deep pan between
the guide bars of the shelf support and the
wire shelf on the guide bars above and
make sure that the feet point down.
Small indentation at the top
increase safety. The indentations
are also anti-tip devices. The
high rim around the shelf
prevents cookware from slipping
of the shelf.
Using the core temperature sensor
The core temperature sensor measures the
core temperature of the meat.
There are two temperatures to be set:
• The oven temperature.
• The core temperature.
Caution! Only use the core
temperature sensor supplied with
the appliance, or genuine
replacement parts.
1. Put the plug of the core temperature
sensor into the socket on the side of the
main oven.
2. Put the point of the core temperature
sensor into the centre of the meat.
3. Press again and again until the
indicator for the core temperature
sensor flashes.
4. Press the button
temperature.
You can set the temperature from 30 °C
to 99 °C. Refer to values in the table.
Recommended core temperatures
50 °C
60 °C
70 °C
5. Set the oven function and the oven
temperature.
When the meat is at the set core
temperature, an acoustic signal sounds for
two minutes. Press a button to stop the
signal.
6. Deactivate the appliance.
15
or to set the core
Rare
Medium
Well done