Clock Functions - IKEA VALFRI Manual

ENGLISH

Clock functions

Clock functions table
Clock function
TIME OF DAY
DURATION
END
TIME DELAY
MINUTE MIND-
ER
Setting and changing the time
You must set the time before you operate
the oven.
Only the top oven works without
the set time.
The flashes when you connect the
appliance to the electrical supply, when
there was a power cut or when the timer is
not set.
Press the or
After approximately five seconds, the
flashing stops and the display shows the
time of day you set.
To change the time of day press
and again until
Setting the DURATION
1. Set an oven function and temperature.
2. Press again and again until
to flash.
3. Press or to set the DURATION
time.
The display shows
To set, change or check the time of day.
To set how long the appliance operates.
To set when the appliance deactivates.
To combine DURATION and END function.
To set countdown time. This function has no effect on the op-
eration of the appliance.
to set the correct time.
again
starts to flash.
.
Application
4. When the time ends,
acoustic signal sounds. The appliance
deactivates automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions and
the knob for the temperature to the off
position.
DURATION works only for the
main oven.
Setting the END
1. Set an oven function and temperature.
2. Press
to flash.
3. Press
The display shows
4. When the time ends,
acoustic signal sounds. The appliance
deactivates automatically.
5. Press any button to stop the signal.
starts
6. Turn the knob for the oven functions and
the knob for the temperature to the off
position.
The function works only for the
main oven.
flashes and an
again and again until
or to set the time.
.
flashes and an
13
starts