Shoulder Harness Position; Contents Of The Box - Nuna pipa Instruction Manual

Contents
of the box
Nuna Pipa Car Seat
Tools Needed: None
Shoulder harness
position
Check that Shoulder Harness Straps are set at the
proper height. Please choose the proper pair of
shoulder harness slots according to the child's
height.
Shoulder Harness Straps must go into the harness
slots nearest to your childs shoulders (4) , but not
above the shoulder line. (5)
If the Shoulder Harness Straps are not at proper
height, the child might be ejected the infant car seat
if there is a crash.
17
Shoulder harness
straps height
adjustment
Use extreme care in threading the Shoulder Harness Straps
according to the figure. If the Shoulder Harness Straps are not
secure, they will not protect your baby.
The ends of the Shoulder Harness Straps must hang in front of the
junction plate.
Ensure that the shoulder harness straps are not twisted before
reassembling the ends onto the junction plate.
1 Press the adjustment button at the front of the seat and pull on
the shoulder harnesses to loosen them.
2 At the back of the seat, take the harness ends off the metal
(7)
junction plate.
3 Pull the harnesses through the slots in the seat. Insert them into
the appropriate set of slots.
4 Reassemble the harness ends onto the junction plate.
The ends of the Shoulder Harness Straps have two loops.
For a smaller baby, use the upper shoulder harness loops.
For a larger baby, use the end shoulder harness loops.
(6)
(8)
(9)
(10)
(11)
18