The Settings Screen - Master Spas INT MP FORCE Owner's Manual

Swim spa Controls

THE SETTINGS SCREEN

TOUCHING A "BUTTON"
When instructions are given to "touch a button" any of the following can be done:
• Navigate to the desired item on any Screen. Touch the specific setting to make a change. The
arrow keys displayed on the left side of the screen will allow you to scroll through the available
options.
PROGRAMMING, ETC.
The Settings Screen is where all programming and other swim spa behaviors are controlled.
This screen has several features that can be acted on directly. These features include Temp Range,
Heat Mode, and Invert Panel. Touch the specific setting to make the change.
All other menu items (with an arrow pointing to the right) go to another level in the menu.
TOUCH-AND-HOLD
The up and down buttons on the left side of the screen allow you to scroll through the different
setting options.
DUAL TEMPERATURE RANGES (HIGH VS. LOW)
This system incorporates two temperature range settings with independent set temperatures. The
specific range can be selected on the Settings screen and is visible on the Main Screen in the upper
right corner of the display.
These ranges can be used for various reasons, with a common use being a "ready to use" setting
vs. a "vacation" setting. Each range maintains its own set temperature as programmed by the
user. This way, when a range is chosen, the swim spa will heat to the set temperature associated
with that range.
High Range can be set between 80°F and 104°F.
Low Range can be set between 50°F and 99°F.
Freeze Protection is active in either range.
DO NOT DIVE.
Settings
Temp Range
Heat Mode
Back
Time of Day
Filter Cycles
Light Cycle
Invert Panel
Lock
52
High
Ready
Normal