Master Spas INT MP FORCE Owner's Manual page 55

Swim spa Controls
THE SETTINGS SCREEN
HEAT MODE – READY VS. REST
In order for the swim spa to heat, a pump needs to circulate water through the heater.
REST Mode will only allow heating during programmed filter cycles.
Ready Mode will allow heating any time the water temperature drops below the set temperature.
READY-IN-REST MODE
READY/REST appears in the display if the swim spa is in Rest Mode and the Jets 1 Button is
touched. It is assumed that the swim spa is being used and will heat to set temperature. After 1
hour, the System will revert to Rest Mode. This mode can also be reset by entering the Settings
Menu and changing the Heat Mode.
DO NOT DIVE.
Settings
Temp Range
Heat Mode
Back
Time of Day
Filter Cycles
Light Cycle
Invert Panel
Lock
53
High
Ready
Normal