The Settings Screen - Master Spas TWILIGHT series Owner's Manual

The Settings Screen

THE SETTINGS SCREEN - TS MP & TS FIT
preSSiNg a "ButtoN"
When instructions are given to "press a button" any of the following can be done:
• Navigate to the desired item on any Screen. When the desired item is highlighted, press the
Select Button.
• Press the button for that device while on the Shortcuts Screen, if the device is one of the 4 func-
tions available.
prograMMiNg, etc.
The Settings Screen is where all programming and other spa behaviors are controlled.
This screen has several features that can be acted on directly. These features include Temp Range,
Heat Mode, and Invert Panel. When one of these items is highlighted, the Select Button is used to
toggle between two settings.
All other menu items (with an arrow pointing to the right) go to another level in the menu.
preSS-aNd-Hold
If an Up or Down button is pressed and held when an item in a Menu List is highlighted, the list
can be scrolled quickly from top to bottom. The scroll bar on the right side of the screen indicates
the relative position of the highlighted item in the list.
Settings
Temp Range
Heat Mode
Back
Time of Day
Filter Cycles
Light Cycle
Invert Panel
Lock
dual teMperature raNgeS (HigH vS. low)
This system incorporates two temperature range settings with independent set temperatures. The
specific range can be selected on the Settings screen and is visible on the Main Screen in the upper
right corner of the display.
These ranges can be used for various reasons, with a common use being a "ready to use" setting
vs. a "vacation" setting. Each range maintains its own set temperature as programmed by the user.
This way, when a range is chosen, the spa will heat to the set temperature associated with that
range.
High Range can be set between 80°F and 104°F.
Low Range can be set between 50°F and 99°F.
Freeze Protection is active in either range.
DO NOT DIVE.
DO NOT DIVE.
High
Ready



Normal

68.143%
26
44