Master Spas INT MP FORCE Owner's Manual page 53

Swim spa Controls
THE SPA SCREEN
ALL EQUIPMENT ACCESS
The Spa Screen shows all available equipment to control, as well as other features, in one easy-to-
navigate screen. The display shows icons that are related to the equipment installed on a particular
swim spa model, so this screen may change depending on the swim spa.
Touch a button to select an individual device. The device that is chosen is highlighted with a white
outline.
Some devices, like pumps, may have more than one ON state, so the icon will change to reflect the
state that the equipment is in. Below are some examples of 2-speed Pump indicators.
Jets Off Jets Low
If the Swim spa has a 24 hour Circ Pump, a Circ Pump Icon will appear to indicate its activity, but
outside of Priming Mode, the 24 hour Circ Pump cannot be controlled directly.
NOTE: The icon for the 24 hour pump (if so equipped) that is associated with the heater will have
a red glow in the center when the heater is running.
SCENES
The scenes area will allow you to preset any of the devices to operate when the scene is activated.
There are four different scenes that can be preset. For example if you would like all of the pumps
to turn on at the same time: turn on the pumps, access the scenes area and highlight #1. Once
this is set anytime you highlight the #1 scene all of the pumps will activate. To store a specific
scene tap and hold the highlighted scene for 5 seconds until the display shows "scene stored" in
the bottom left corner.
DO NOT DIVE.
Jets High
Back Jets 1 Jets 2
Ready in Rest Mode
Heating
51
Jets 3 Light