Master Spas INT MP FORCE Owner's Manual page 81

Micheal phelps swim spas series
Hide thumbs Also See for INT MP FORCE:
Table of Contents

Advertisement

FUSION TOUCH SOUND
(if equipped)
Warning:
Never remain in your swim spa longer than 15 minutes per session when the water temperature
is above 98˚F (36˚C). If you wish to spend more time in your swim spa, whether enjoying music, or just lounging,
be sure to keep the swim spa water at or below body temperature (98.6˚F / 37˚C).
Once powered up, system will indicate discoverable. Discoverable indicates the system is open for connection
with a mobile Bluetooth audio device. BT Connected indicates that a Bluetooth audio device is connected to
the BBA system. BT Not Connected indicates that no Bluetooth connection was made during the discoverable
time and the unit has shut off Bluetooth connection. Use power icon to cycle power off and then on to make
Bluetooth discoverable again.
BLUETOOTH CONNECTION:
1. Turn on the amplifier from the Music menu of swim spa control panel.
2. Turn on Bluetooth function of your mobile or music device
3. On your mobile device, click search for Bluetooth device.
Make sure you are close to the swim spa.
4. Select "PPGME60" from the pairing list.
5. Enter "6000" as the password (if required). On some older units the passcode is "60BT"
6. Click "Connect"
7. Once connected, you can now start playing your favorite music from your music device.
8. Operating Range is up to 30' (will vary, dependent on installation)
DO NOT DIVE.
DO NOT DIVE.
101
79

Advertisement

Table of Contents
loading

Table of Contents