Master Spas INT MP FORCE Owner's Manual page 69

Propulsion System Controls
SWIM CONTROL OPERATION
12
4
7
8
9
1. Up button increases the swim number (speed).
2. Down button lowers the swim number (speed).
3. Swim Number indicates the speed of the propulsion drive. Speed is indicated in numbers from
1 to 100.
4. Mode reference used during workouts to calculate calorie counts when used with SNAPP APP.
During manual operation this setting can be changed by touching the highlighted text but you
will not see a change in the swim current.
5. Start button starts the propulsion drive after a 5 second delay. This delay allows the swimmer
time to get into position and prepare for the swim current.
6. Pause button allows you to momentarily pause the operation of the propulsion drive. Whenever
the drive is restarted there will be a 5 second delay before it resumes operation.
7. User workout selection allows you to choose between the default user and any custom users that
have been added through the SNAPP APP.
8. Smart Workouts can be selected from here by touching the highlighted area. Please refer to the
Smart Workout Reference guide included with the swim spa information materials. From there
you can select Smart Workouts that will allow you exercise with preprogrammed workouts that
control the Wave Propulsion Systems.
9. Duration shows the duration of the complete workout.
10. Elapsed Time will be displayed in a manual mode workout and indicates the total time that the
propulsion drive has been running in the current workout and is only active in manual mode.
Remaining Time will be displayed in a Smart Workout and indicates how much time is left to
complete the workout.
11. Step in Cycle indicates the time you have been in a specific workout step.
12. Temperature of water in swim spa
13. Time of day.
14. Lock APP allows you to restrict control of the propulsion system from the Swim Number App
(SNAPP)
Note: If the topside control touch screen becomes erratic or will not function correctly, it may need to
be synced to the main control pack. To sync the topside control hold the pause button until the display
resets and displays (Synchronizing) in the lower left hand corner of the display.
DO NOT DIVE.
3
5
10
67
13
1
2
6
14
11