Battery
@
Control switch safety lock (switch-on
;
interlock)
Control switch
=
Grip (insulated gripping surface)
%
Guide
&
Bandsaw blade
(
Direction-of-rotation arrow on casing
)
3.2 Product overview
Saw blade guard
|
Saw blade guard fastening screw
¡
3.3 Intended use
The product described is a cordless bandsaw. It is designed for cutting metals and plastics.
The product is designed for two-handed operation.
▶ Use only Hilti Liion batteries of the B 18 / B 22 series with this product.
▶ Use only Hilti battery chargers of the C4/36 series to charge these batteries.
3.4 Possible misuse
▶ Do not use the power tool to cut bricks, concrete, cellular concrete, natural stone or tiles.
▶ Do not use the product to cut pipes containing liquids.
▶ Do not saw into unknown materials.
3.5 Liion battery status indicator
The charge state of the Li-ion battery and malfunctions of the power tool are indicated by the indicator of
the Liion battery. Press either of the battery release buttons to check the charge state of the LiIon battery.
Status
4 LEDs light up.
3 LEDs light up.
2 LEDs light up.
1 LED lights up.
1 LED flashes.
1 LED flashes, the power tool is not in working or-
der.
4 LEDs flash, the power tool is not in working or-
der.
6
English
Printed: 12.06.2017 | Doc-Nr: PUB / 5310770 / 000 / 01
Lever for tensioning bandsaw blade
+
Side handle (insulated gripping surface)
§
Battery release button
/
Battery state of charge indicator
:
Roller for bandsaw blade
∙
Blade guide
$
Rubber ring
£
Meaning
•
Charge state: 75 % to 100 %
•
Charge state: 50 % to 75 %
•
Charge state: 25 % to 50 %
•
Charge state: 10 % to 25 %
•
Charge state: < 10 %
•
The battery has overheated or is completely
discharged.
•
The power tool is overloaded or has overheated.