Hilti SB 4-A22 Operating Instructions Manual
Hide thumbs
Also See for SB 4-A22:
- Original operating instructions (204 pages) ,
- Manual (46 pages) ,
- Original operating instructions (204 pages)
Related Manuals for Hilti SB 4-A22
Summary of Contents for Hilti SB 4-A22
- Page 1 SB 4-A22 English Printed: 12.06.2017 | Doc-Nr: PUB / 5310770 / 000 / 01...
- Page 2 Printed: 12.06.2017 | Doc-Nr: PUB / 5310770 / 000 / 01...
- Page 3 This symbol is intended to draw special attention to certain points when handling the product. 1.3 Product information Hilti products are designed for professional use and may be operated, serviced and maintained only by trained, authorized personnel. This personnel must be informed of any particular hazards that may be encountered.
- Page 4 The technical documentation is filed and stored here: Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | 86916 Kaufering, Germany 2 Safety 2.1 General safety precautions for power tools WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool.
- Page 5 ▶ Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. ▶...
- Page 6 ▶ If the battery is too hot to touch, it may be defective. In this case, place the power tool in a non-flammable location, well away from flammable materials, where it can be kept under observation and left to cool down. Contact Hilti Service after the battery has cooled down. English...
- Page 7 3 Description 3.1 Product overview English Printed: 12.06.2017 | Doc-Nr: PUB / 5310770 / 000 / 01...
- Page 8 The product described is a cordless bandsaw. It is designed for cutting metals and plastics. The product is designed for two-handed operation. ▶ Use only Hilti Liion batteries of the B 18 / B 22 series with this product. ▶ Use only Hilti battery chargers of the C4/36 series to charge these batteries.
-
Page 9: Operation
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare parts, consumables and accessories approved by Hilti for use with the product can be found at your local Hilti Center or online at: www.hilti.com 4 Technical data 4.1 Bandsaw... - Page 10 ▶ Pull the battery forward and out of the product. 5.2 Inserting/changing the bandsaw blade WARNING Risk of damage An unsuitable or incorrectly fitted bandsaw blade can damage the saw. ▶ Use only bandsaw blades that are suitable for this saw. WARNING Risk of injury by contact with the bandsaw blade.
- Page 11 English Printed: 12.06.2017 | Doc-Nr: PUB / 5310770 / 000 / 01...
- Page 12 English Printed: 12.06.2017 | Doc-Nr: PUB / 5310770 / 000 / 01...
- Page 13 1. Slacken the 2 screws securing the blade cover and remove the cover. 2. Turn the side handle counterclockwise to unscrew it from the casing of the bandsaw. 3. Swivel the lever in the direction of rotation through its full 180 ° of travel. Note The side handle has to be removed to allow the lever to pivot.
- Page 14 2. Slacken the 2 screws securing the blade cover and remove the cover. 3. Turn the side handle counterclockwise to unscrew it from the casing of the bandsaw. 4. Pivot the lever in the direction of rotation through its full 180° of travel. Note The side handle has to be removed to allow the lever to pivot.
- Page 15 5.6 Removing the battery 1. Press and hold down the two release buttons. 2. Pull the battery forward and out of the product. 5.7 Switching on 1. Press the safety lock. 2. Press the control switch. Note For safety reasons, the control switch cannot be locked and has to be held down while the tool is in operation.
-
Page 16: Troubleshooting
• Do not operate the cordless tool if signs of damage are found or if parts malfunction. Have the tool repaired by Hilti Service immediately. • After cleaning and maintenance, fit all guards or protective devices and check that they function correctly. - Page 17 Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, your old tools, machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative for further information.
- Page 18 English Printed: 12.06.2017 | Doc-Nr: PUB / 5310770 / 000 / 01...
- Page 19 Printed: 12.06.2017 | Doc-Nr: PUB / 5310770 / 000 / 01...
- Page 20 Hilti = registered trademark of Hilti Corp., Schaan 20170602 Printed: 12.06.2017 | Doc-Nr: PUB / 5310770 / 000 / 01...