Table of Contents
Advertisement
MM-015371-001, Rev. C
Have a relatively easy access for servicing.
CH-721 Control Head
Microphone
Motorcycle's
Left Handlebar
(Partial view)
Figure 8-4: Typical CH-721 Control Head Installation on a Motorcycle
For a "hanging" control head
installation, the pedestal can
be attached to the top of the
head via threaded holes in
the top of the head's case.
This
figure
pedestal
attached
bottom of the control head via
threaded holes in the bottom
of the case.
#8-32 Pan-Head Screw; 4
places (Included with
Mounting Pedestal)
Figure 8-5: Optional Control Head Mounting Pedestal (Part Number MACDOS0012)
Due to the large number of different makes and models of motorcycles, it is the installer's responsibility
to determine how to mount the control head and other related equipment such as the microphone hanger
and speaker.
42
(Using the Standard U-Shaped Mounting Bracket)
shows
the
to
the
Control Head
Mounting Bracket
FM24841-0001
(Included with
Mounting Bracket
Kit KT-008608)
Control Head
Adapter
Bracket
(Not Supplied)
Pedestal shown
attached to a CH-721
Scan model control
head (Head is not
included with Mounting
Pedestal)
Control Head Mounting
Pedestal MACDOS0012
(Pedestal can be attached to the
bottom of the head (as shown) or it
can be attached to the top of the
head.)
Advertisement
Table of Contents
