Control Head Mechanical Installation; General Information; Figure 8-1: Ch-721 Scan Model Control Head Front Panel; Figure 8-2: Ch-721 System Model Control Head Front Panel - Harris M5300 Installation And Safety Manual

MM-015371-001, Rev. C
8

CONTROL HEAD MECHANICAL INSTALLATION

8.1

GENERAL INFORMATION

The radio must be connected to a control head to provide the operator-to-radio interface. Two different
control heads are available — the CH-721 Scan model and the CH-721 System model. See Figure 8-1 and
Figure 8-2 respectively. The CH-721 Scan model control head features three (3) large menu selection
buttons. The System model control head has a 12-button keypad to allow advanced operations without the
need of a DTMF-capable microphone.
Figure 8-3 on page 41 illustrates the rear panel of the two control head models. Both models have
identical rear panels and rear panel connectors.
On/Off/
Volume
Control
Transmit
and Busy
Indicators
System/
Group/
Channel
Selection
Control
/ Ramp Control
The CH-721 control heads feature a large easy-to-read 3-line graphical vacuum fluorescent display, an
on/off/volume control knob, menu controls and buttons, trunking mode buttons, an emergency/home
button, a scan on/off/volume control, and three (3) preset buttons. Other front panel components include a
microphone connector and LED-type indictors. One LED indicator is the busy indicator that lights when
40
Preset/
Softkey
Buttons
Microphone Connector

Figure 8-1: CH-721 Scan Model Control Head Front Panel

(Other controls are same as shown for Scan model.)

Figure 8-2: CH-721 System Model Control Head Front Panel

3-Line Graphical Vacuum
Fluorescent Display
+/- Ramp Control
Scan On/Off Button
Ambient Light-Level Sensor
12-Button Keypad
Option Button
Menu Button
Clear Button
Emergency/
Home Button
Option Button
Menu Button
Clear Button