Configure Portal Authentication - TP-Link EAP110 User Manual
For tp-link omada access points
Hide thumbs
Also See for EAP110:
- Installation manual (84 pages) ,
- User manual (74 pages) ,
- Quick setup manual (10 pages)
Table of Contents
Advertisement
5. The following page will appear. Configure this SSID for the guests. Change SSID to
"guest_2.4GHz", keep the Security Mode as "None" and check the box to enable the
Portal feature for this SSID. Click OK.
6. Click
the configurations for the 2.4GHz band, configure two SSIDs for the employees and
guests on the 5GHz band.
Configure Portal Authentication
Follow the steps below to configure portal authentication:
1. Go to the Wireless > Portal page.
to enter the configuration page for the 5GHz band. Similarly to
87
Hide quick links:
Advertisement
Table of Contents
