Cisco Ucs B200 Blade Servers; Cisco Ucs 5108 Server Chassis Installation Guide - Cisco UCS 5108 Installation Manual

Blade Servers
• Industry-standard double-data-rate 3 (DDR3) memory
• Remote management through an integrated service processor that also executes policy established in
Cisco UCS Manager software
• Local keyboard, video, and mouse (KVM) and serial console access through a front console port on
each server
• Out-of-band access by remote KVM, Secure Shell (SSH), and virtual media (vMedia) as well as Intelligent
Platform Management Interface (IPMI)
The Cisco UCS B-Series offers multiple blade server models. The supported processor family is indicated by
M1, M2, M3, or M4 designations on the model.

Cisco UCS B200 Blade Servers

For full service and installation instructions, see the
Note. You can install up to eight UCS B200 M1 or M2 Blade Servers to a chassis.
Figure 1: Cisco UCS B200 M1 and M2
1
2
3
4
5
6

Cisco UCS 5108 Server Chassis Installation Guide

6
Paper tab for server name or serial
numbers
Blade ejector handle
Ejector captive screw
Hard drive bay 1
Hard drive bay 2
Power button and LED
Cisco UCS B200 Blade Server Installation and Service
7 Network link status LED
8 Blade health LED
9 Console connector
Reset button access
10
11 Beaconing LED and button
Overview