1] Points > [2] Replace Point Rfid Menu Parameters; 1] Points > [3] Remove Point Rfid Menu Parameters - Bosch D9412GV4 Installation And System Reference Manual

D9412GV4/D7412GV4 v2.03 | Installation and System Reference Guide | 18.0 Installer Menu
.
18.2.2 [1] Points > [2] Replace Point RFID Menu Parameters
In this menu, you can replace RFID points.
Replace Point RFID
B91x/B92x keypads Configuration of Point RFID replacement
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [2] Wireless > [1] RF Points > [2] Replace Point RFID menu option.
3. Press [PREV] or [NEXT] to scroll through the list, and go to the point for which you wish to
replace the device, or simply enter the point number.
4. Press [ENTER] to replace Point RFID. The keypad instructs you to reset the device.
9. Initiate activity for the desired RADION device (walk through the coverage pattern if enrolling a
motion detector, or press the button on the keyfob if enrolling a keyfob, or open the door or
window if enrolling a door/window contact), or press the [RESET] button on an Inovonics
device.
5. When the keypad shows Point RFID Replaced, escape from the menu.
B93x/B94x keypads Configuration of Point RFID replacement
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [2] Wireless > [1] RF Points > [2] Replace Point RFID menu option.
3. Press [PREV]/
to replace, or simply enter the point number.
4. Press the Edit softkey to replace the Point RFID. The keypad instructs you to reset the new
device.
5. Initiate activity for the desired RADION device (walk through the coverage pattern if enrolling
a motion detector, or press the button on the keyfob if enrolling a keyfob, or open the door or
window if enrolling a door/window contact), or press the [RESET] button on an Inovonics
device.
6. When the keypad shows Point RFID Replaced, escape from the menu.
18.2.3 [1] Points > [3] Remove Point RFID Menu Parameters
In this menu, you can remove RFID points.
Remove Point RFID
B91x/B92x keypads Configuration of Point RFID removal
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [2] Wireless > [1] RF Points > [3] Remove Point RFID menu option.
3. Press [PREV] or [NEXT] to scroll through the list, and go to the point you wish to remove, or
simply enter the point number.
4. Press [ENTER] to remove the device. The keypad removes the device and shows Point RFID
Removed.
5. Press [ENTER] to save the programming.
6. Escape from the menu.
Bosch Security Systems, Inc. | 7/16 | F01U265457-09
or [NEXT]/ to scroll through the list, and go to the point for which you wish
137