Page 2
FOR YOUR SAFETY DO NOT store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Record This Important Information Date of Purchase Purchased From Address City State Phone Contact Machine Model Machine Serial Number Important Phone Numbers Medical Emergency...
DO NOT use the machine DO NOT make unauthorized modifications or alterations if it is not in proper operating condition, and report to this machine. Amano Pioneer Eclipse assumes any damage or operation faults immediately. no liabilities for injury or damage resulting from an unauthorized modification or alteration to the machine.
Technical Specifications: Description 225BU20 225BU20E 225BU20EB Voltage (V) Frequency (Hz) Current (A) Pad / Brush Speed 1500 rpm 1500 rpm 1500 rpm Power 1.5 hp (1.1 kW) 1.5 hp (1.1kW) 1.5 hp (1.1kW) Pad Size 20” (51 cm) 20” (51 cm) 20”...
Keep your machine regularly maintained by following the two people when lifting this machine. maintenance information in this manual. Order parts and supplies only from an Authorized Amano Pioneer Eclipse Figure 2 Distributor. Use the parts illustration section of your manual when ordering parts.
Grounding Instructions WARNING: To prevent possible electric shock, protect the machine from rain. Keep the machine in a dry building. 120 Volt Machines WARNING: To prevent possible electric shock, always This product must be grounded while in use to protect use a 3-wire electrical system connected to the electrical the operator from electrical shock.
How to Operate the Machine Operator Handle Grips Use the operator handle grips to operate and move Installing the Pad the machine. The switch levers on the underside of CAUTION! Using the wrong pad on this machine the handle grips, turn the motor on and off. Locate the can overload the motor.
Operation After Use 1. Place the operators handle (4) in the upright (vertical) 1. Unwrap the power cord and plug it into the properly position and unplug the power cord. Wrap the power grounded outlet. cord around the operator hand grips (1) and the cord 2.
Check machine wiring for fray or cut Check the carbon brushes of motor These items must be performed with the proper tools and training. Contact an Amano Pioneer Eclipse Factory Certified Technician unless you have the proper equipment and technical proficiency. Machine Troubleshooting...
Electrical Schematic - 120V Electrical Schematic - 127V & 230V ADD THIS PAGE TO PAGE 13 WITH EXISITNG WIRING SCHEMATIC THIS ONE IS FOR 127V AND 230V 225BU20EB AND 225BU20E MODELS...
PIONEER ECLIPSE CORPORATION MACHINE OR ANY OTHER (2) Warranty repairs will be made by your Amano Pioneer Eclipse INCIDENTAL OR CONSEQUENTIAL DAMAGE EXCEPT AS Corporation Distributor without charge for parts and labor. They STATED IN THE WARRANTY APPLICABLE TO EACH MACHINE.
Need help?
Do you have a question about the PE225BU and is the answer not in the manual?
Questions and answers