Operating Procedures; General Advice; Functions - Sirius Range Hoods SU909 Installation Instructions Manual

O PE R AT I N G PR O C E DU RES
Read all the instructions before operating
the appliance. Save these instructions for
future reference.

General Advice.

Ensure that the grease filters are in place.
Without these components, operating blo-
wers could catch on to hair, fingers and lo-
ose clothing. Keep fan, filters and surfaces
free from grease and fat. Always turn the
hood fan ON when cooking. NEVER leave
cooking unattended.
NEVER dispose cigarette ashes, ignitable
substances or any foreign objects into blo-
wers.
Cooking that generates flame is not recom-
mended as this hood is equipped with a
thermal overload that will shut down the mo-
tor if it senses excessive heat. When frying,
oil in the pan can easily
te. Heat oil slowly in an appropriately sized
pot (covering the entire burner) to reduce
the risk of boiling over and burning.
In the event of a range top grease fire, ob-
serve the following:
Switch OFF the range hood. Turn off the
cook top then smother flames with a close
fitting lid, cookie sheet or other metal tray. If
the flames do not go out immediately
EVACUATE AND CALL THE FIRE DE-
PARTMENT.
Never pick up a flaming pan – you may be
burned. DO NOT USE
wet dishcloths or towels, as a violent steam
explosion may occur.
8
overheat and igni-
WATER including
FUNCTION
SU909 (Fig. 12).
A: Light ON/OFF button
B: Blower Speed 1 (low) or OFF
C: Blower Speed 2 (medium)
D: Blower Speed 3 (high)
E: Blower Speed 4 (intensive)
F: 10 Minute Timer
fig. 12
Filter requires washing indicator: after 30
hours of use, all the buttons will light up to
remind you that the grease filter should be
cleaned. Follow the instructions for cleaning
filters in this booklet. Once the grease filters
have been cleaned and replaced, reset by
pressing the timer button (F). Do not rely so-
lely on this indicator. Generally, the grease
filter should be washed on a regular basis to
avoid grease filter fires.
The blower should be turned on for appro-
ximately 5 minutes before cooking in order
to establish air currents upward through the
hood. Use the low speeds for normal use
and the higher speeds for strong odors and
fumes.