Table of Contents
Advertisement
Lone Worker
When this function is enabled, an alert tone will sound if the preset time elapses. Then the user must
press any key to indicate that he/she is safe, otherwise the emergency procedure will be activated. This
feature provides an added security and safety feature for individuals who work remotely from their team.
Operations are detailed as follows:
Upon press of the Lone Worker function key, the LCD will display LONE ON, and the Lone Worker
1.
function will be activated.
2.
If no key is pressed after the preset time, the radio will continuously sound the Lone Worker alert
tone during the preset time, and then enter the emergency mode.
3.
If there is any key press before the radio enters the emergency mode, the Lone Worker timer will be
reset and the Lone Worker function will be re-activated.
If the Lone Worker key is pressed, the LCD will display LONE OFF, and the Lone Worker function
4.
will be disabled.
2-Tone Encode Select (TTS)
1. Press the programmed TTS key, the LCD displays its preset 2-Tone number or alias. The LCD
scrolls the alias if it exceeds 8 digits.
2. Press ▲/ ▼ to select 2-Tone number (01~32) or alias.
3. Holding down PTT to transmit the selected code.
4. Upon release of PTT, the signaling squelch is disabled and the LED flashes orange. The LED lights
green when the signal is received, and flashes orange if the signal disappears.
5. If the programmed Monitor key is pressed, or no signal is received within the preset time period, the
signaling squelch will be enabled.
Display Frequency
Upon press of the programmed Display Frequency key, the LCD displays the frequency of the current
channel.
Display Mode
Upon press of the programmed Display Mode key, the radio toggles among the following 5 display
modes:
24
Advertisement
Table of Contents
