Configuring the Sector out of the Box - IP Addresses
Figure 5-5: Definition of IP address done here
6. Enter the IP address, Subnet Mask and default Gateway and then click OK. You are
offered a warning:
7. Click Yes. The dialog is dismissed and you are returned to the main window. The
Sector Status panel indicated (as expected), Device unreachable.
8. Disconnect the HBS ODU and repeat steps 1 to 6 for each HSU in the sector. The
opening windows will look different, but the HSU site configuration dialogs will be
the same.
RADWIN 5000 HPMP User Manual
Release 3.1.00
Chapter 5
5-6