Table 4-2 Preconfigured Setup - Radwin RW-5200-0250 User Manual

Installing the Software
Installing the Software
Any PC running the RADWIN Manager application can be used to configure a RADWIN 5000
HPMP sector.

To install the RADWIN Manager application:
1. Insert the CD into the CD/DVD drive of your computer.
2. Choose Install RADWIN Manager and follow the on-screen instructions of the instal-
lation wizard to complete the setup of the RADWIN Manager application.
If the installation program fails to start, browse to your CD/DVD drive, chose the
setup.exe program and run it.
Getting Started with the RADWIN Manager
We will look at a preconfigured setup as follows:
Table 4-2: Preconfigured setup
Unit Name Attribute
IP Address
Net Mask
Default Gateway
Sector ID
HBS Sector_01
Contact
Location
Band
Channel Bandwidth
IP Address
Net Mask
PM_AT_02 Default Gateway
Contact
Location
HSU
IP Address
Net Mask
PM_AT_01 Default Gateway
Contact
Location

To start the RADWIN Manager:
1. Connect the managing computer to the HBS PoE LAN port.
RADWIN 5000 HPMP User Manual
Value
10.103.15.7
255.255.255.0
0.0.0.0
EBG_20560554
J.S. Bach
PM_DAF
5.730 - 6.845 GHz FCC/IC
20MHz
10.103.15.6
255.255.255.0
0.0.0.0
J. Btahms
North 02
10.103.15.8
255.255.255.0
0.0.0.0
L. van Beethoven
North 01
Release 3.1.00
Remark
All communicating HSUs and HBS in
the same subnet
Inherited by all communicating HSUs
Optional
Location of Contact - optional
Inherited by all communicating HSUs
Inherited by all communicating HSUs
All communicating HSUs and HBS in
the same subnet
All communicating HSUs and HBS in
the same subnet
Chapter 4
4-2