Key Features Of Radwin 5000 Hpmp - Radwin RW-5200-0250 User Manual

Key features of RADWIN 5000 HPMP

A Sector consists of a BS and a group of SUs within the angular sector covered by the BS
antenna. A Sector is typically 60° or 90° depending of course on the choice of antenna.
BSs may be collocated to provide sectorial coverage up to 360°.
The RF characteristics of a Sector will be common to each radio: Frequency (regulation),
band and channel bandwidth. Adjacent Sectors in a PtMP network will typically use different
frequencies and non-overlapping bands to mitigate mutual BS interference.
The RADWIN 5000 HPMP product suite supports considerably higher capacity than other cur-
rent technologies (such as Wi-Max). We distinguish between generic BSs and SUs and RAD-
WIN units, relabelling the latter, HBSs and HSUs (H=hich capacity).
Key features of RADWIN 5000 HPMP
»
100 Mbps aggregate net throughput, full duplex
»
Configurable Maximum Information Rate (MIR) per HSU
»
Long Range – 40km @ 20Mbps
»
Advanced OFDM & MiMO 2x2 for nLOS performance
»
Enhanced interference mitigation capability
»
Inter & intra site sync. to reduce self interference
»
Long range – up to 40 km/25 miles
»
Dedicated traffic bandwidth allocation ensuring SLA & latency
»
Low latency – min < 3ms, typical 4 to 10ms
»
Channel bandwidth – 20 MHz
»
Regulation - FCC/ETSI/WPC/UNI /MII
»
Multi band HBSs and HSUs
»
Simple to deploy
»
Fully integrated with RADWIN Legacy solutions:
• Coexists with RADWIN 2000 and WinLink 1000 products
• Common RADWIN Manager
RADWIN 5000 HPMP User Manual Release 3.1.00
Chapter 1
1-2