Nav/Com/Transponder/Audio Panel; Adf Tuning (Optional); Dme Tuning (Optional); Selecting A Transponder Mode - Garmin G1000 Reference Manual

NAV/COM/TRANSPONDER/AUDIO PANEL

ADF TUNING (OPTIONAL)

1) Press the ADF/DME Softkey.
2) Turn the small FMS Knob to enter the first digit of the desired ADF
frequency.
3) Turn the large FMS Knob to select the next desired field.
4) Turn the small FMS Knob to enter the desired number.
5) Repeat steps 3 and 4 until the desired ADF frequency is entered.
6) Press the ENT Key to accept the new frequency.
7) Press the ENT Key again to transfer the frequency to the active field.
8) Turn the large FMS Knob to select the MODE field.
9) Turn the small FMS Knob to select ANT, ADF, ADF/BFO, or ANT/BFO.
10) Press the ENT Key to complete the selection.

DME TUNING (OPTIONAL)

1) Press the ADF/DME or DME Softkey.
2) Turn the large FMS to select the DME source field.
3) Turn the small FMS Knob to select the desired Nav radio.
4) Press the ENT Key to complete the selection.

SELECTING A TRANSPONDER MODE

1) Select the XPDR Softkey to display the Transponder Mode Selection Softkeys.
2) Select the desired softkey to activate the transponder mode.
190-01842-00 Rev. A Garmin G1000 Cockpit Reference Guide for the Piper PA-46 Meridian
Nav/Com/XPDR/Audio Panel
7