Quick Configuration Tool; Overview; Operation - Dahua F Series DHI-ITC237-PU1B-IR User Manual

2.0 mp cmos

Table of Contents

5 Quick Configuration Tool

Quick configuration tool can search current IP address, modify IP address. At the same time, you

can use it to upgrade the device.

Please note the tool only applies to the IP addresses in the same segment.

Step 1. Double click the "ConfigTools.exe"icon, you can see an interface is shown as in

5-1

In the device list interface, you can view device IP address, port number, subnet mask, default

gateway, MAC address and etc.

Step 2. Select one IP address and then right click mouse, you can see an interface is shown as

Figure 5-2

Note:

You can set the IP address, subnet mask and gateway for the network camera and PC. Please

note network camera IP address and PC IP address shall be in the same network segment if

there is no router. Network camera default IP address is 192.168.1.108. If there is a router,

please set the corresponding gateway and subnet mask.

The factory default user name is admin and password is admin. For security reasons, please

modify your password after you first login.

For detailed WEB operation, please refer to the Network Camera Web Operation Manual in the

resource CD.

Figure 5-1

Figure

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the F Series DHI-ITC237-PU1B-IR and is the answer not in the manual?