ZyXEL Communications VMG8924-B10D User Manual page 124

Table 29 Network Setting > Home Networking > LAN Setup (continued)
LABEL DESCRIPTION
LAN IP Setup
IPAddress Enter the LAN IPv4 IP address you want to assign to your VMG in dotted decimal notation, for
example, 192.168.1.1 (factory default).
Subnet Mask Type the subnet mask of your network in dotted decimal notation, for example 255.255.255.0
(factory default). Your VMG automatically computes the subnet mask based on the IP Address
you enter, so do not change this field unless you are instructed to do so.
DHCP Server State
DHCP Select Enable to have the VMG act as a DHCP server or DHCP relay agent.
Select Disable to stop the DHCP server on the VMG.
Select DHCP Relay to have the VMG forward DHCP request to the DHCP server.
DHCP Relay This field is only available when you select DHCP Relay in the DHCP field.
Server Address
IP Address Enter the IPv4 IP address of the actual remote DHCP server in this field.
IP Addressing This field is only available when you select Enable in the DHCP field.
Values
Beginning IP This field specifies the first of the contiguous addresses in the IP address pool.
Address
Ending IP This field specifies the last of the contiguous addresses in the IP address pool.
Address
Auto reserve IP Select Enable to have the VMG record DHCP IP addresses with the MAC addresses the IP
for the same addresses are assigned to. The VMG assigns the same IP address to the same MAC address
host when the host requests an IP address again through DHCP.
DHCP Server This is the period of time DHCP-assigned addresses is used. DHCP automatically assigns IP
Lease Time addresses to clients when they log in. DHCP centralizes IP address management on central
computers that run the DHCP server program. DHCP leases addresses, for a period of time,
which means that past addresses are "recycled" and made available for future reassignment to
other systems.
This field is only available when you select Enable in the DHCP field.
Days/Hours/ Enter the lease time of the DHCP server.
Minutes
DNS Values This field is only available when you select Enable in the DHCP field.
DNS Select the type of service that you are registered for from your DNS service provider (From ISP).
Select DNS Proxy if you have the DNS proxy service. The VMG redirects clients' DNS queries to a
DNS server for resolving domain names.
Select Static if you have the Static DNS service.
DNS Server 1/2 Enter the first and second DNS (Domain Name System) server IP addresses the VMG passes to
the DHCP clients.
LAN IPv6 Mode Setup
IPv6 State Select Enable to activate the IPv6 mode and configure IPv6 settings on the VMG.
Link Local Address Type
EUI64 Select this to have the VMG generate an interface ID for the LAN interface's link-local address
using the EUI-64 format.
Manual
Select this to manually enter an interface ID for the LAN interface's link-local address.
LAN Global Identifier Type
EUI64 Select this to have the VMG generate an interface ID using the EUI-64 format for its global
address .
Chapter 8 Home Networking
VMG8924-B10D/B30D User's Guide
124