Figure 105 Security > Firewall > General
The following table describes the labels in this screen.
Table 80 Security > Firewall > General
LABEL
Firewall
Low
Medium
High
Apply
Cancel
17.3 The Protocol Screen
You can configure customized services and port numbers in the Protocol screen. For a comprehensive
list of port numbers and services, visit the IANA (Internet Assigned Number Authority) website. See
Appendix D on page 325
Click Security > Firewall > Protocol to display the following screen.
Figure 106 Security > Firewall > Protocol
The following table describes the labels in this screen.
Table 81 Security > Firewall > Protocol
LABEL
Add new
Protocol entry
Name
Chapter 17 Firewall
DESCRIPTION
Select Enable to activate the firewall feature on the VMG.
Select Low to allow LAN to WAN and WAN to LAN packet directions.
Select Medium to allow LAN to WAN but deny WAN to LAN packet directions.
Select High to deny LAN to WAN and WAN to LAN packet directions.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
for some examples.
DESCRIPTION
Click this to add a new service.
This is the name of your customized service.
VMG8924-B10D/B30D User's Guide
197