Sony HVR-Z5C Service Manual page 350

Assigning the functions to the ASSIGN buttons (Continued)
b Notes
• When you change [SHOT TRANSITION]
(p. 46), press the ASSIGN 4 button repeatedly
to exit the shot transition screen.
• You cannot return from the stored SHOT-A or
SHOT-B settings to previous settings after you
execute the shot transition during recording.
• If you press the following buttons during the
shot transition operation, the operation will be
canceled:
– PICTURE PROFILE button
– MENU button
– ASSIGN button to which [EXP.FOCUS] is
assigned
– STATUS CHECK button
– ASSIGN button to which [SMTH SLW REC]
is assigned
• You can also make a transition from the SHOT-
A to the SHOT-B or from the SHOT-B to the
SHOT-A. For example, to make a transition
from the SHOT-A to the SHOT-B, display the
shot transition check screen, press the ASSIGN
5 button to bring up the SHOT-A and press the
REC START/STOP button. Then, display the
shot transition execution screen and press the
ASSIGN 6 button.
• You can rehearse the shot transition by pressing
the respective buttons (ASSIGN 5 or ASSIGN
6) to which your customized settings are
assigned before pressing the REC START/
STOP button in step 4.
To cancel the operation
Press the ASSIGN 4 button repeatedly to
exit the shot transition screen.
48