Juniper EX9200 Features Manual page 185

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
[edit]
user@switch@ set protocols vstp vlan all interface all
Enable VSTP on all the VLANs on the switch:
[edit]
user@switch@ set protocols vstp vlan all
Enable VSTP for a specific interface within a specified VLAN group:
[edit]
user@switch@ set protocols vstp vlan-group group group-name vlan (vlan-id |vlan-range |
open-set-of-values) interface interface-name
Enable VSTP for all the interfaces within a specified VLAN group:
[edit]
user@switch@ set protocols vstp vlan-group group group-name vlan (vlan-id |vlan-range |
open-set-of-values) interface all
You can disable VSTP as follows:
NOTE: You cannot disable the VSTP VLAN parameters for all VSTP
interfaces.
Disable VSTP on an individual interface:
[edit]
user@switch@ set protocols vstp interface interface-name. disable
Disable VSTP on a specific interface within a specific VLAN:
[edit]
user@switch@ set protocols vstp vlan vlan-id interface interface-name. disable
Disable a specific VSTP interface on all the VLANs on the switch:
[edit]
user@switch@ set protocols vstp vlan all interface interface-name. disable
Disable a specific VSTP interface within a specific VLAN group:
[edit]
user@switch@ set protocols vstp vlan-group group group-name vlan (vlan-id |vlan-range |
open-set-of-values) interface interface-name disable
Understanding VSTP for EX Series Switches and QFX Series Switches on page 159
Chapter 7: Using VSTP
169