Juniper EX9200 Features Manual page 112

Spanning-Tree Protocols Feature Guide for EX9200 Switches
Verification
Purpose
Action
96
interface ge-0/0/23 {
cost 1000;
mode point-to-point;
}
interface ge-0/0/19 {
cost 1000;
mode point-to-point;
}
msti 1 {
bridge-priority 16k;
vlan [10 20];
}
msti 2 {
bridge-priority 32k;
vlan [30 40];
}
}
}
vlans {
voice-vlan {
vlan-id 10;
}
employee-vlan {
vlan-id 20;
}
guest-vlan {
vlan-id 30;
}
camera-vlan {
vlan-id 40;
}
}
To confirm that the configuration is working properly, perform these tasks:
Verifying MSTP Configuration on Switch 1 on page 96
Verifying MSTP Configuration on Switch 2 on page 98
Verifying MSTP Configuration on Switch 3 on page 99
Verifying MSTP Configuration on Switch 4 on page 101
Verifying MSTP Configuration on Switch 1
Verify the MSTP configuration on Switch 1.
Issue the operational mode commands show spanning-tree interface and show
spanning-tree bridge:
user@switch1> show spanning-tree interface
Spanning tree interface parameters for instance 0
Copyright © 2017, Juniper Networks, Inc.