Juniper EX9200 Features Manual page 107

Configuring MSTP on Switch 3
CLI Quick
Configuration
Step-by-Step
Procedure
Copyright © 2017, Juniper Networks, Inc.
vlan-id 40;
}
}
To quickly configure interfaces and MSTP on Switch 3, copy the following commands
and paste them into the switch terminal window:
[edit]
set vlans voice-vlan description "Voice VLAN"
set vlans voice-vlan vlan-id 10
set vlans employee-vlan description "Employee VLAN"
set vlans employee-vlan vlan-id 20
set vlans guest-vlan description "Guest VLAN"
set vlans guest-vlan vlan-id 30
set vlans camera-vlan description "Camera VLAN"
set vlans camera-vlan vlan—id 40
set interfaces ge-0/0/26 unit 0 family ethernet-switching vlan members [10 20 30 40]
set interfaces ge-0/0/28 unit 0 family ethernet-switching vlan members [10 20 30 40]
set interfaces ge-0/0/24 unit 0 family ethernet-switching vlan members [10 20 30 40]
set interfaces ge-0/0/26 unit 0 family ethernet-switching interface-mode trunk
set interfaces ge-0/0/28 unit 0 family ethernet-switching interface-mode trunk
set interfaces ge-0/0/24 unit 0 family ethernet-switching interface-mode trunk
set protocols mstp configuration-name region1
set protocols mstp bridge-priority 8k
set protocols mstp interface ge-0/0/26 cost 1000
set protocols mstp interface ge-0/0/26 mode point-to-point
set protocols mstp interface ge-0/0/28 cost 1000
set protocols mstp interface ge-0/0/28 mode point-to-point
set protocols mstp interface ge-0/0/24 cost 1000
set protocols mstp interface ge-0/0/24 mode point-to-point
set protocols mstp msti 1 bridge-priority 4k
set protocols mstp msti 1 vlan [10 20]
set protocols mstp msti 2 bridge-priority 16k
set protocols mstp msti 2 vlan [30 40]
To configure interfaces and MSTP on Switch 3:
Configure the VLANs
1.
[edit vlans]
user@switch3# set voice-vlan description "Voice VLAN"
user@switch3# set voice-vlan vlan-id 10
user@switch3# set employee-vlan description "Employee VLAN"
user@switch3# set employee-vlan vlan-id 20
user@switch3# set guest-vlan description "Guest VLAN"
user@switch3# set guest-vlan vlan-id 30
user@switch3# set camera-vlan description "Camera VLAN"
user@switch3# set guest-vlan vlan-id 40
Configure the VLANs on the interfaces, including support for the Ethernet Switching
2.
protocol:
[edit interfaces]
, ,
voice-vlan employee-vlan
Chapter 4: Using MSTP
, and
guest-vlan camera-vlan
:
91