Chapter 6: Chassis Setup and Maintenance
Chapter 6
Chassis Setup and Maintenance
6-1
Overview
This chapter covers the steps required to install components and perform
maintenance on the chassis. The only tool required is a Phillips screwdriver.
Review the warnings and precautions listed in the manual before setting up or
servicing this chassis. These include information in Chapter 4: Warning Statements
for AC Systems and the warning/precautions listed in the setup instructions.
Control Panel
Control Panel
Drive Bays
Drive Bays
Figure 6-1. Front View
Power Supply Modules
Rear of Node Tray
Rear of Node Tray
Figure 6-2. Rear View
6-1