To Begin Scrubbing; To Stop Scrubbing - Windsor VOYDU1, VOYXDU 10086150 Operating Instructions Manual

TO BEGIN SCRUBBING

When operating the machine around people, pay
close attention for unexpected movement. Use
extra caution around children.
1. Turn machine power on.
2. Position rotary switch to the position matching
the process to be preformed, and the chemical
that was added to the solution tank or chemical
tank (Deluxe), either interim or interim/pre-spray
(Deluxe) or extraction cleaning.
3. Check position of reverse button and the
position speed control knob so that the machine
is set to travel in the direction and the speed
intended.
4. Drive machine forward to begin scrubbing.

TO STOP SCRUBBING

1. While scrubbing turn off the pump switch to stop
2. Allow the throttle switches to return to neutral.
3. Rotate the selector switch to the accessory
4. Turn the rotary switch to the off position by
DELUXE
1. While scrubbing turn off the pump switch to stop
2. Allow the throttle switches to return to neutral.
3. Rotate the selector switch to the accessory
4. Turn the rotary switch to the off position by
FOR SAFETY: Before leaving or servicing
machine: stop on level surface, turn off machine
and remove key.
FOR SAFETY: When using machine, go slow on
inclines and slippery services.
86292490 VOYAGER DUO 08/20/07
MACHINE OPERATION
spraying solution. Continue to scrub and
recover the solution for an additional pass.
position so that the vacuum motor continues to
run and evacuate the system. This will also
raise the deck and vacuum shoes.
rotating the selector switch clockwise. Turn
machine power off.
spraying solution. Continue to scrub and
recover the solution for an additional pass.
position so that the vacuum motor continues to
run and evacuate the system. This will also
raise the deck and vacuum shoes.
rotating the selector switch clockwise. Turn
machine power off.
3-13