Connecting The Devolo Magic 2 Lan; Starter Kit - Automatic Set-Up For A New Devolo Magic Network - Devolo Magic 2 LAN1-1 Manual

3.3 Connecting the
devolo Magic 2 LAN
CAUTION! Damage to the device caused
by ambient conditions
Only use device indoors in dry conditions
In the following sections we describe how to
connect the devolo Magic 2 LAN
it into a network. We clarify the exact procedures
based on potential network scenarios.
For the permitted voltage range for opera-
ting the device and the power consumption,
refer to the type plate on the rear of the de-
vice. For additional technical information on
our products, refer to the product area at
www.devolo.global.
3.3.1Starter Kit – Automatic set-up for a
new devolo Magic network
1
Connect one devolo Magic 2 LAN
Internet access device's network connection
(e.g. your Internet router).
2
Connect the other devolo Magic 2 LAN
the network connection of your computer or
another network device using a network cable.
1-1
3
Plug both devolo Magic adapters into available
power sockets within 3 minutes. As soon as the
1-1
LEDs on both adapters flash white at regular
and integrate
intervals of 0.5 sec., they are ready to operate
and automatically start the process of establis-
hing an encrypted connection to each other
(see Chapter 2.3.1 Reading the indicator
light).
1-1
to your
1-1
to
CAUTION! Tripping hazard
Lay the network cable in a barrier-free
manner and ensure that the electrical soc-
ket and the connected network devices are
easily accessible
If the LEDs on both devolo Magic adapters
light up in white,
devolo Magic network has been set up ac-
cording to your individual specifications
and is protected from unauthorised access.
devolo Magic 2 LAN
Initial use 20
then your
1-1