Led Indicators - 4IPNET HSG326 User Manual

FUNC + ENTER
FUNC + '0' +
ENTER
'4-digit' +
ENTER
'asterisk (*)' +
ENTER

LED Indicators

Power
Status
4ipnet gateway (HSG/WHG).
To clear what is pressed. This is used when the operator
pressed a wrong button or combination. The system will
also clear it automatically after five seconds.
To activate Safe Mode – disabling the FUNC + '1' +
ENTER shortcut key in order to protect SDS200W's
information leakage.
To unlock Safe Mode. This 4-digit password can be
changed on the WMI at "System >> Safe Mode
(Password)." The default value is '0000.'
To lock the keypad, excluding the TAS and the Reset
button. In Lock Mode, the Status indicator will enter
into special flashing. Press asterisk (*) + ENTER
again to disable the function, and the LED indicator
Status will go back to short illuminated intervals or
long illuminated intervals.
When the power adapter is connected, Power will
become constantly on; when disconnected, the light
turns into constantly off. Always check if Power is on
before using SDS200W.
1. Short illuminated intervals means SDS200W
successfully booted up. It flashes slowly.
2. Long illuminated intervals means SDS200W and
uplink device connected
3. Special flashing means the keypad locked. The
indicator fast-blinks twice periodically.
HSG326 Wireless Hotspot Gateway
104
User's Manual
ENGLISH