SMA Solar Technology AG
3. To exit the display view, press [ESC].
4. To confirm the settings that are to be reset, perform the following steps:
• Press [OK].
☑ The display view Confirm the resetting appears.
• Select OK and confirm with [OK].
☑ The selected settings are reset.
☑ If the network settings were reset or the Cluster Controller was reset to default settings, the
Cluster Controller restarts.
5. If Sunny Portal is being used and the Cluster Controller was reset to default settings, adjust the
system identifier for Sunny Portal in the Cluster Controller (see the Cluster Controller user
manual).
Installation Manual
7 Troubleshooting
ClusterController-IA-en-15
75