SMA CLCON-10 Installation Manual page 27

SMA Solar Technology AG
Terminal Pin group
X5 Digital input 5
Digital input 6
Digital input 7
Digital input 8
X6 Analog current output 1
Analog current output 2
Analog current output 3
X7 Temperature input 1
Temperature input 2
X8 Analog current input 1
Analog current input 2
Analog current input 3
Analog voltage input 4
X9, X10 –
Installation Manual
Pin Function
A1 to A3 Signal 1 of 4 for the reactive power set-
point in grid management services
A4 to A6 Signal 2 of 4 for the reactive power set-
point in grid management services
B1 to B3 Signal 3 of 4 for the reactive power set-
point in grid management services
B4 to B6 Signal 4 of 4 for the reactive power set-
point in grid management services
A1 to A3 Analog current output for feedback on
current active power limitation in grid
management services
A4 to A6 Analog current output for feedback on
current reactive power setpoint in grid
management services
B1 to B3 Analog current output for feedback on
the current total active system power (as
a percentage) based on the maximum
nominal system power
A1 to A5 Analog input for connecting an external
temperature sensor
B1 to B5 Analog input for connecting a module
temperature sensor
A1 to A4 Analog current input for connecting an ir-
radiation sensor or for measuring the ac-
tive power feed-in at the grid-connection
point
A5 to A8 Analog current input for active power lim-
itation in grid management services or for
measuring the active power feed-in at the
grid-connection point
B1 to B4 Analog current input for reactive power
setpoint in grid management services or
for measuring the active power feed-in at
the grid-connection point
B5 to B8 Analog voltage input for connecting a
sensor
1 to 8 Network ports for connection to the in-
verters (Speedwire)
ClusterController-IA-en-15
6 Connection and Commissioning
27