Table of Contents
Advertisement
SMA Solar Technology AG
LED
Status (
)
Installation Manual
Status
Cause and corrective measure
glowing green
Normal operation
glowing yellow
At least one device has the status Warning.
Corrective measures:
glowing red
At least one device has the status Error.
Corrective measures:
The SD memory card in the Cluster Controller may be
defective.
Corrective measures:
flashing red
The Cluster Controller could not start correctly. A sys-
tem error has occurred.
Corrective measures:
• Check the Cluster Controller event log (see the
Cluster Controller user manual).
• Refer to the device documentation.
• Check the Cluster Controller event log (see the
Cluster Controller user manual).
• Refer to the device documentation.
• Check the Cluster Controller event log (see the
Cluster Controller user manual).
• If the SD memory card is defective, contact
Service (see Section 11, page 83).
• Contact the Service (see Section 11, page 83).
ClusterController-IA-en-15
7 Troubleshooting
67
Advertisement
Table of Contents
