Advertisement
User Manual
English
WebGUI Control
On a PC/Laptop which is connected to an active network system, open a web browser and type device's
IP address (available from LCM monitor or OSD menu) on the web address entry bar. The browser will
display the device's Switch, EDID settings and system Settings.
Type in username and password to entering interface.
Switch page allows user to edit input and output setting, also allows setup or recalling preset.
Press one or multiple output buttons then press the input button to set the input to select output.
By clicking the edit button (marked in red) on each output and input you can edit output/input name.
Advertisement
