Advertisement
User Manual
Front panel
1. IR WINDOW: The remote control will need to be pointed at this window to control switching
2. POWER BUTTON: Press the button to power the Matrix on/off
3. LOCK: Press the button to lock all the buttons on the panel; press again to unlock
4. A-D BUTTONS: Press a button to set the input source
5. 1-4 LED: The LED will indicate which source is set to display on which output
Rear Panel
1. INPUT 1-4: Connect your HDMI sources to these input ports
2. OUTPUT A-D: Connect your HDMI displays to these output ports
3. IR IN: Connect the included IR extender cable to this port, ensuring the remote is in direct line of
sight of the receiver.
4. RS232: Connect a PC or control system with a 9 pin cable to transmit RS232 commands
5. CONTROL: Connect to an active network for telnet and Web GUI control
6. SERVICE: Manufacture use only
7. POWER: Connect the supplier 24V DC power supply to this port
Remote Control
1. POWER: Press to power the Matrix or put it in stand-by
2. OUTPUT A: Press buttons 1-4 to select the input port to display on output A
3. OUTPUT B: Press buttons 1-4 to select the input port to display on output B
4. OUTPUT C: Press buttons 1-4 to select the input port to display on output C
English
Advertisement
