Grundig CUC 2030 N Service Manual page 18

Special functions
The following adjustments are carried out using the
» DIALOG CENTER «.
Call up » DIALOG CENTER « with button h and but-
ton G.
¢
Adjustments are always terminated by pressing .
T XT
1
TV on with ...
If you frequently use the set as an AV monitor – e.g.
2
together with a camera as a monitoring system or
together with a satellite receiver – then this function
can give priority to the programme position
» AV «. After switching on with the on/off switch,
instead of programme position » P 1 «, programme
position » AV « will appear.
1 Select the line » SPECIAL FUNCTIONS « from the
» DIALOG CENTER « with button p or P and con-
firm with G. 1
2 Select the line » TV on with « and select the desired
program position » Prog 1 « or » AV « with F or E.
2
Picture/sound scale
To adjust volume, brightness and colour contrast,
scales appear. These may be switched off.
1 Select the line » SPECIAL FUNCTIONS « from the
» DIALOG CENTER « with button p or P and con-
firm with G.
2 Select the line » Pic./sound opt. « and select » off «
with button F or E.
Station name (SERVICE-functions)
3
Some broadcasting stations broadcast their station
name. When changing programme position this is
briefly displayed. You may switch this display off.
4
Select the line » SERVICE « from the » DIALOG
1
CENTER « with button p or P and confirm with
5
G.
Select the line » Station name « and select » off «
2
with button F or E.
When changing programme position, only the num-
ber of the programme position is displayed.
1
2
Equalizing the volume
The volume of normal TV broadcasts and commer-
cials may be different. You may equalize this
volume.
Select the line » SPECIAL FUNCTIONS « from the
» DIALOG CENTER « with button p or P and con-
firm with G.
Select the line » Volume limiter « and select »on«
with button F or E.
Setting the Sleep Timer
You can input a switch off time for your TV set with
the »SLEEP TIMER« menu. The set switches to
standby after the set time has elapsed.
Select the »SLEEP TIMER« line from the »DIALOG
CENTER« with the P or p button and confirm by
pressing the G button.
The »SLEEP TIMER« menu appears.
SLEEP TIMER
– –
m i n .
0 – 9 TXT
Input the desired switch off time to two places
(from 01 ... 99 min) with the 0 ... 9 digit keys.
The input switch off time can be canceled with the
- button.
¢
Setting is ended with the button.
T XT
Displaying the programme position
number
It is possible to permantently display the number of
the selected programme position.
Press the h button until the »OK Dialog Center«
on-screen display disappears.
The programme position number is permanently
displayed.
Press the h button twice if you wish to cancel this
function.
Parental lock
Using this function, you may enter a number code
which blocks all functions.
Activating parental lock
Call up the » DIALOG CENTER « using buttons h
1
and G.
Select and call up the line » Parental lock «.
2
3 Enter a number code with the number buttons
0...9, always using four digits (e.g. 1111).
1
Save the number code with G.
4
The key appears in red, switch off the page
¢
» PARENTAL LOCK « with button .
T XT
After switching off the set and switching on again
the page » Parental lock « appears, all functions are
locked.
Please take good note of the number code!
Switching off parental lock
Switch on the set.
1
2 Enter a number code with the number buttons
0 ... 9, always using four digits (e.g. 1111).
The set switches to the TV screen. After switching
off again the parental lock is activated again.
To cancel the parental lock function, select and call
up the line "Parental lock" from the » DIALOG
CENTER «. Enter the number code with four digits
and press button - .
If you forget the number code, a number combina-
!
tion on the last page of this instruction manual will
assist you. If you press these buttons in sequence
on the remote control, the "lock" will be cancelled.
SERVICE
Call up the »DIALOG CENTER« with the h and the
1
G buttons.
Select the »SERVICE« line with the P or p button 1
2
and call it up using the G button.
Select the desired functions with the P or p but-
3
tons.
Change with the F or E buttons.
4
¢
Each setting is ended with the button.
T XT
Decoder selection
Refer to »Setting for operation with decoder«
(refer to page 16).
Colour (manually adjust the colour
norms)
The colour norms are automatically assigned when
allocating the channel position with channel search.
You do not need to carry out this setting if the
colour is already well adjusted on the different
channels.
Select the required colour norm (PAL or auto).
Select the blue screen
With this setting a grainy image can be switched to
a blue image.
Select the black screen
With this setting it is possible to avoid distracting
flickering of channels whilst switching channel
position.
Station name on/off
Switch the station display on or off (see »Station
name«).
SAT
This settin is only necessary if an external SNR 105
MicroSAT receiver is connected.
Three settings can be selected: »ON1«, »ON2« and
»off«. See the operating manual of the SNR 105 to
determine which setting you must make.
If no SNR 105 is connected, this setting must be set
to »off«.
Channel position selection is not possible if SAT
»ON1« is selected without a connected SNR 105,
the screen remains dark and »SAT« is displayed.
Switching formats
The automatic picture format switching function
can be switched off in poor reception conditions.
Select the desired setting.
Service Code
The functions of this line are reserved for authori-
sed dealers.